LG Dryer Drum Roller Replacement Guide

LG dryers, known for their efficiency, can run into problems over time. One common problem involves the drum rollers, the critical components responsible for the smooth rotation of the drum. In this in-depth guide, we'll delve into the cost of replacing LG dryer drum rollers, covering everything from signs of problems to the replacement process.

Signs of Drum Roller Problems

Unusual noises coming from your LG dryer during operation or difficulty spinning the drum are clear signs of potential drum roller problems. Recognizing these signs early can save you from more extensive damage and costly repairs in the future, such as damage to the dryer drum itself. For reference, the drum (part #3045EL1002F) for the LG DLG5966W dryer model is no longer in production.

General Information about LG Dryer Models

LG offers a variety of dryer models, each with its own drum roller configuration. It's important to identify your specific model before delving into the replacement process. This will ensure that you purchase the correct replacement parts, avoiding compatibility issues.

Finding Replacement Parts

Typically, the cost of a single drum roller for an LG dryer can range from $10 to $30, while a set of rollers can cost anywhere from $20 to $60. You don't want to skimp on genuine parts. An original LG roller has a rolling bearing at its core and will last many times longer than a cheap substitute. An example of this part for LG DLG5966W dryer is shown in the photo. Saving now 5 - 15 dollars in the future you will have additional more significant costs to repair the same problem again. Deciding to hire a professional for replacement can also give you significant budget savings in the future. A professional technician will always take note of other appliance technical problems that are just beginning and offer you additional maintenance on them when servicing.

Keep in mind that prices are subject to change and it is recommended that you check with appliance parts retailers, online stores, or official LG support for the most up-to-date pricing information. If you are unsure about the replacement process, it is recommended that you consult a professional technician or refer to your dryer owner's manual for instructions.

LG Dryer Repair offers only genuine LG parts for installation.

Factors Affecting the Replacement Cost

Replacement cost depends on several factors, including whether you choose a single roller or a set. Prices also fluctuate depending on the dryer model and the retailer you choose, so it's recommended that you weigh your options carefully.

Precautions

Regardless of which approach you choose, safety is paramount. Always disconnect power sources before beginning repairs. Also, use recommended safety gear, including gloves, to protect yourself during the replacement process.

Do-it-yourself Repairs and Professional Repairs

Deciding whether to proceed with the replacement with your own hands or hire a professional involves both cost and experience. While DIY can save you money, those less familiar with appliance repair should weigh the risks and potential safety issues.

If you plan to replace LG dryer drum rollers yourself, here's a general guide on how to do it:

• Gather materials:
• Replacing drum rollers
• Screwdriver
• Trowel
• Needle-nose pliers
• Work gloves
• Safety first:
• Make sure the dryer is disconnected from the power source.
• If possible, turn off the gas supply if your dryer is gas powered.
• Drum access:
• Depending on the model, you may need to remove the top or front panel of the dryer to access the drum.
• Locate the rollers:
• The rollers are usually located at the back of the drum or on the inside of the front panel.
• Removing the drum:
• Carefully remove the drum from the dryer. You may need to loosen the belt tension by removing the belt from the motor pulley.
• Replace the pulleys:
• Use a screwdriver to remove the retaining clips or screws securing the old drum rollers.
• Note the orientation of the rollers and replace with new rollers.
• Secure the new rollers in place with the clips or screws.
• Reassemble:
• Reinstall the drum, making sure the belt is properly positioned on the engine pulley and tensioner.
• Reinstall the front or top panel you removed earlier.
• Check the dryer:
• Plug the dryer back in and test it to make sure the drum is spinning smoothly without any unusual noises.
• While you have the dryer open, consider performing routine maintenance. Clean the inside of the dryer, especially around the motor and pulley. Removing accumulated lint can help improve dryer efficiency and reduce the risk of fire.
• Inspect other components:
• Take the opportunity to inspect other components, such as the belt and idler pulley, for signs of wear. If any other parts are damaged, it may be worth replacing them as well to prevent future problems.
• Purchasing replacement parts:
• If you haven't purchased replacement parts yet, now is the time to do so. Order genuine LG replacement parts from authorized dealers or reputable online stores to ensure compatibility and quality.
• Assemble and secure:
• Make sure all components are properly secured and aligned before fully assembling the dryer. Make sure screws are tightened and all clamps are in place.
• Final Testing:
• Plug the dryer in and run the test cycle. Listen for any unusual noises and watch the drum spin. If everything seems to be working properly, you have successfully replaced the rollers.
• Dispose of old parts:
• Dispose of old rollers and any other replaced components responsibly. Some communities have specific rules for disposing of appliance parts, so check your local waste disposal guidelines.
• Prevention:
• To extend the life of your dryer and prevent future problems, perform regular cleaning and maintenance. Clean the lint filter after each use, and periodically check and clean the ventilation system.
• LG Dryer repair technicians always further inspect and maintain the appliance by following the above procedures when performing repairs.

Step-by-step Replacement Process

• Access to the drum:
• Remove the panels to gain access to the dryer drum.
• Locate and remove old rollers:
• Identify the old drum rollers and remove them using the appropriate tools.
• Installing new rollers:
• Securely install new drum rollers, ensuring proper orientation.
• Scheduled maintenance option:
• Take advantage of the opportunity to perform routine maintenance while the dryer is open. Thoroughly clean the interior and inspect other components, such as the belt and idler pulley, for signs of wear.
• Final Testing and Troubleshooting:
• After reassembling the dryer, perform a final test to ensure proper functionality. Be prepared to troubleshoot any problems that may arise after replacement.
• Dispose of old parts responsibly:
• Dispose of old rollers and any replaced components responsibly, following local waste management regulations.
• Extended maintenance tips:
• To extend the life of your dryer, perform regular maintenance, including cleaning the lint filters after each use and periodic inspection and cleaning of the ventilation system.

Conclusion

In conclusion, understanding the cost of LG dryer tumble roller replacement requires careful research, consideration of various factors, and precautions. Whether you choose the DIY route or seek professional help, prioritizing routine maintenance can improve the efficiency and longevity of your dryer.

Case in point: Replacing dryer drum rollers on an LG DLG5966W dryer model ... total cost was $290 for the customer including deep cleaning the unit, lubricating moving parts with high-temperature grease, and checking the exhaust. Details in photo.