LG Washer Bearing Replacement Cost

Replacing a worn drum bearing on an LG washer costs $320–420 in Los Angeles — it's one of the bigger jobs because the drum comes out and the tub often splits, but it's well under the price of a new machine and buys years of quiet operation. Here's what's in that price and what moves it. The $65 diagnostic is waived with the repair. Call (323) 990-7550.

Cost Breakdown

The bearing job breaks down into a modest part and a lot of labor. An OEM bearing-and-seal kit is the inexpensive piece; the bulk of the $320–420 is the work — tearing the machine down, pulling the drum, pressing out the old bearing, fitting the new one, and reassembling it correctly. That hands-on time is where the cost lives, and it's why a bearing sits at the higher end of common washer repairs.

What Affects the Price

Where your job lands in the $320–420 range depends mostly on the model. Some LG tubs split cleanly to reach the bearing; others take more disassembly, which adds labor. Front-load machines generally run a bit more than top-loaders because of how they come apart. We also check the condition of the tub seal and the spider arm while we're in there — if the spider is corroded it changes the picture, and we'll show you before going further.

Repair vs Replace

At $320–420, a bearing replacement is roughly a third of the $800–1,500 a comparable new LG washer costs delivered and installed, and it buys another eight to ten years on a machine you already know. That math favors the repair on an otherwise sound washer. If your machine is loud and walking across the floor, our guide to an LG washer shaking and banging covers how we tell a worn bearing from a balance or suspension problem before any teardown.

What's Included

The price covers the OEM bearing and tub seal as a kit, all the labor to tear down and reassemble the machine, and a one-year warranty on parts and labor. The $65 diagnostic is waived when you approve the repair, and we confirm the bearing is the real cause before quoting so you're not paying for a teardown you don't need.

Hearing a grinding rumble on spin? Our LG Dryer Repair techs handle bearing replacements across LA, Orange County, and Ventura County — we confirm the cause on-site and quote before any work. Call (323) 990-7550; the $65 diagnostic is waived when you approve the repair.

Frequently Asked Questions — LG Washer Bearing Replacement Cost

How much does LG washer bearing replacement cost?

LG washer bearing replacement costs $320–420 installed in Los Angeles, including an OEM bearing and seal kit. Most of that is labor — the drum has to come out and the tub often splits to reach the bearing. The $65 diagnostic is waived when you approve the repair.

Why is bearing replacement one of the pricier LG washer repairs?

Because it's labor-heavy — reaching the bearing means pulling the drum and, on many LG models, splitting the outer tub, a 2–3 hour job. The bearing and seal parts are modest; the cost is the teardown and reassembly done right.

Does the price include the seal too?

Yes — we replace the tub seal with the bearing as a kit, and that's included in the $320–420. Doing the bearing without the seal just causes another failure, so we never split them. We're licensed with the Bureau of Household Goods and Services (#49573).

Is a $320–420 bearing job worth it versus a new washer?

Usually yes — a comparable new LG washer is $800–1,500, so a bearing replacement is a fraction of that and buys another 8–10 years. We'll give you an honest read if other major parts are also worn.

How do I know the noise is the bearing and not something else?

A worn bearing makes a loud grinding rumble that worsens on spin, often with drum play you can feel by hand. We confirm it on-site before quoting — a similar noise can come from the drive system, and we don't charge you for a bearing if that's not what's failing.